# Turn Tracker issue (shows entries even if set up not to).

**URL:** https://forum.vassalengine.org/t/turn-tracker-issue-shows-entries-even-if-set-up-not-to/7170
**Category:** Technical Support & Bugs
**Created:** [September 16, 2014, 2:52pm UTC](https://forum.vassalengine.org/t/turn-tracker-issue-shows-entries-even-if-set-up-not-to/7170 "2014-09-16T14:52:48Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![Joe](https://forum.vassalengine.org/user_avatar/forum.vassalengine.org/joe/32/165_2.png) [@Joe](https://forum.vassalengine.org/u/Joe)
#### Post date: [September 16, 2014, 2:52pm UTC](https://forum.vassalengine.org/t/turn-tracker-issue-shows-entries-even-if-set-up-not-to/7170/1 "2014-09-16T14:52:48Z")

</div>

Hi folks,

using the latest Vassal engine (3.2.13) and set up a Turn Tracker. Top level is the Turn nr., the next level is the Side (German, British, Soviet…), hence:

British Turn 1  
German Turn 1  
British Turn 2  
German Turn 2  
…

I also enabled the option to select sides from the multiple available ones and set up the first side to begin.

But a weird thing happens - when I then click “next” on the Turn Tracker, it counts normally. However when I click “back”, there is also one other side added to the mix, even if I deselected it in the Turn Tracker setup window, so for each Turn an additional side shows up in the game text window…

Is this a known bug perhaps?

---

<div class="post-metadata">

### Author: ![uckelman](https://forum.vassalengine.org/user_avatar/forum.vassalengine.org/uckelman/32/10020_2.png) [@uckelman](https://forum.vassalengine.org/u/uckelman)
#### Post date: [January 1, 2015, 9:13pm UTC](https://forum.vassalengine.org/t/turn-tracker-issue-shows-entries-even-if-set-up-not-to/7170/2 "2015-01-01T21:13:38Z")

</div>

Thus spake joeyeti:

> Hi folks,
> 
> using the latest Vassal engine (3.2.13) and set up a Turn Tracker. Top  
> level is the Turn nr., the next level is the Side (German, British,  
> Soviet…), hence:
> 
> British Turn 1  
> German Turn 1  
> British Turn 2  
> German Turn 2  
> …
> 
> I also enabled the option to select sides from the multiple available  
> ones and set up the first side to begin.
> 
> But a weird thing happens - when I then click “next” on the Turn  
> Tracker, it counts normally. However when I click “back”, there is also  
> one other side added to the mix, even if I deselected it in the Turn  
> Tracker setup window, so for each Turn an additional side shows up in  
> the game text window…
> 
> Is this a known bug perhaps?

I’ve never seen this before. Would you post a minimal module made with  
the current release (3.2.15 as I write this) which demonstrates the  
problem?

–  
J.

---

<div class="post-metadata">

### Author: ![Joe](https://forum.vassalengine.org/user_avatar/forum.vassalengine.org/joe/32/165_2.png) [@Joe](https://forum.vassalengine.org/u/Joe)
#### Post date: [January 10, 2015, 4:07pm UTC](https://forum.vassalengine.org/t/turn-tracker-issue-shows-entries-even-if-set-up-not-to/7170/3 "2015-01-10T16:07:10Z")

</div>

Hi Joel,

sorry for late reply, was quite busy 🙂

Here is the current (testing and non-release) version of the Valor&Victory mod - it was used for adding new features to it and the next version will be the next release.

[dropbox.com/s/t0fq5hwucwbov … .vmod?dl=0](https://www.dropbox.com/s/t0fq5hwucwbovfy/Valor%26Victory111.vmod?dl=0)

HTH!

Joe