# Using Multi Zone Grid Loactions in At Start Stacks

**URL:** <https://forum.vassalengine.org/t/using-multi-zone-grid-loactions-in-at-start-stacks/9671>\
**Category:** Module Design\
**Created:** [January 18, 2019, 8:59pm UTC](https://forum.vassalengine.org/t/using-multi-zone-grid-loactions-in-at-start-stacks/9671 "2019-01-18T20:59:13Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![zentiggr](https://forum.vassalengine.org/letter_avatar_proxy/v4/letter/z/c77e96/32.png) [@zentiggr](https://forum.vassalengine.org/u/zentiggr)\
**Post date:** [January 18, 2019, 8:59pm UTC](https://forum.vassalengine.org/t/using-multi-zone-grid-loactions-in-at-start-stacks/9671/1 "2019-01-18T20:59:13Z")

</div>

I have a single map in the module, multi-zoned.  
Default hex grid numbered over the whole map.  
Four Zones defined, NW, SW, NE, SE, with custom grids and numbering, alphabetical instead of numeric.

I can’t get At-Start Stacks to recognize the Zone grid locations. What am I missing?

Thanks!

---

<div class="post-metadata">

**Author:** ![Jardic](https://forum.vassalengine.org/user_avatar/forum.vassalengine.org/jardic/32/226_2.png) [@Jardic](https://forum.vassalengine.org/u/Jardic)\
**Post date:** [January 19, 2019, 7:55am UTC](https://forum.vassalengine.org/t/using-multi-zone-grid-loactions-in-at-start-stacks/9671/2 "2019-01-19T07:55:50Z")

</div>

I’m not an expert.  
I never tried to have grids on top of each other. I know when I defined a box (say ‘dead units’) on-top of the grid, I could not access the hex numbers underneath. But I am learning new VASSAL stuff everyday. Looking forward to the answer also.